New To Myriad RF?

Plug & Play projects provide integrated hardware + software SDR platforms, and packaged applications.

Component projects are for use by hardware designers and SDR developers.

Browse Plug & Play ProjectsBrowse Component Projects

ClockTamer

ClockTamer is a device manufactured by Fairwaves to provide a low-cost small-size configurable clock generator with GPS sync option. It was specifically designed to be used with USRP, but nothing prevents you from using it with other device of your choice given it has external clock input.

STREAM

STREAM is a flexible platform for developing high-performance digital and RF designs using an Altera Cyclone IV FPGA and Lime Microsystems FPRF transceiver. It is available in its original form factor and a much more compact, lower cost micro variant.

LMS7002M Control Driver

This project contains a C driver for control of the LMS7002M transceiver. The driver provides user APIs for tuning frequencies, setting gains, setting filters, setting sample rates, setting stream modes, configuring switches, and calibration. Although this driver can select the streaming mode of the LMS7002M, it does not directly interact with receive or transmit baseband data.

Lime Suite

Lime Suite is a collection of software supporting several hardware platforms including the LimeSDR, drivers for the LMS7002M transceiver RFIC, and other tools for developing with LMS7-based hardware.

UmTRX

UmTRX provides a single board solution for industrial SDR applications which require the frequency stability and accuracy of a GPS synchronized clock, and supports two full-duplex and fully independent RF channels which can run on any frequency from 0.3-3.8GHz.

Parallella-RFv1.2_3D_SS

Parallella-RF

The Parallella-RF module is based on the original Myriad-RF 1 design and has been adapted for use with the Parallella many-core computing platform.

Novena-RF

The Novena-RF module is based on the original Myriad-RF 1 design and has been adapted for use with the Novena open hardware computing platform, which can be configured for embedded applications and as an all-in-one desktop or a laptop.

RASDR

RASDR is an Open Hardware project undertaken by members of the Society of Amateur Radio Astronomers (SARA) to develop a low cost, high performance software defined receiver for use by SARA members

We welcome new contributors and project proposals

Submit a Project Proposal Contributor Guidelines