Components

The LMS8001-Companion board provides a four channel, highly integrated, highly reconfigurable frequency shifter platform, utilising the LMS8001A integrated circuit. One of the possible applications is extending the RF frequency range of the LimeSDR platform up to 10 GHz.

The LimeSDR Mini development board is a hardware platform for high-performance and logic-intensive digital and RF designs that use Altera’s MAX 10 FPGA and Lime Microsystems’ LMS7002M RF transceiver.

An expansion board for the LimeSDR family that provides individually settable, bi-directional level-shifted I/O for FPGA GPIO 0-7.

Lime Adaptive Digital Predistortion implements power amplifier linearisation for improved power efficiency and reduced running cost of wireless infrastructure. LimeADPD is designed for use with the LimeSDR QPCIe board.

LimeSDR-QPCIe is a 4x4 MIMO PCIe board which provides support for adaptive digital predistortion (ADPD) and with GPS for frequency accuracy/stability.

LimeSDR PCIe has an identical feature set to the original LimeSDR board and instead of USB 3.0 interfaces with the host via PCIe, hence has supports slightly increased bandwidth.

LimeSDR is a low cost, open source, apps-enabled software defined radio (SDR) platform that can be used to support just about any type of wireless communication standard; it can transmit and receive UMTS, LTE, GSM, LoRa, Bluetooth, Zigbee, RFID, and Digital Broadcasting, to name but a few.

The FreeSRP is an open-source (hardware and software) platform for software-defined radio that is affordable, high performance, compatible with existing SDR software such as GNU Radio, and includes an expansion port for hardware add-ons. FreeSRP comes in a small, portable form factor (7 cm x 11 cm) that can be…

STREAM is a flexible platform for developing high-performance digital and RF designs using an Altera Cyclone IV FPGA and Lime Microsystems FPRF transceiver. It is available in its original form factor and a much more compact, lower cost micro variant.

The Reference Development Kit (RDK) provides a highly flexible platform for digital designers and software developers, enabling them to create wireless systems without the need for RF design skills. It also serves as a reference model to accelerate the creation of complementary boards and integrated solutions.

This project aims to build a collection of component footprints and models that are useful when designing RF systems.

The Novena-RF module is based on the original Myriad-RF 1 design and has been adapted for use with the Novena open hardware computing platform, which can be configured for embedded applications and as an all-in-one desktop or a laptop.

ClockTamer is a device manufactured by Fairwaves to provide a low-cost small-size configurable clock generator with GPS sync option. It was specifically designed to be used with USRP, but nothing prevents you from using it with other device of your choice given it has external clock input.

This project is concerned with creating RF front-end modules, such as PAs, LNAs and filters, that can be used together with an SDR platform in order to create a complete wireless solution.

The Parallella-RF module is based on the original Myriad-RF 1 design and has been adapted for use with the Parallella many-core computing platform.

MIMO platform for advanced communications and PNT applications The A2300 is a multiple-input and multiple-output (MIMO) transceiver module incorporating two wideband Field Programmable RF (FPRF) transceivers (300 MHz to 3.8 GHz) from Lime Microsystems, 10-axis accelerometer, gyro, compass and barometer sensors, and a large programmable FPGA capable of over 300…